Good quality Motor Grader G9138
G9138F is a high-speed, high efficiency, high precision and versatile product developed by SDLG after full investigation of market demands,which can complete the ground leveling and trenching, slope scraping, bulldozing, snow discharge, loosing, compaction, material distribution, mixing, etc, and is widely used in highways, airports, defense engineering, mine construction, road construction, water conservancy construction, farmland improvement and other construction conditions.
Fuel Efficient Engine.
Low Vibration, Noise, Dust +UV Resistant cab
Meritor wet axle with “no-spin” differential lock as standard
Balance box enables the 4 rear wheels to swing up and down by +/- 15°
| L*W*H | 8120*2410*3235mm |
| Min ground clearance of front axle | 590mm |
| Ground clearance of rear axle | 400mm |
| Wheelbase | 6040mm |
| Wheel tread | 2070mm |
| Balance box center distance | 1538mm |
|
Overall parameters |
|
| Overall working weight | 12100kg |
| Max. inclination angle of front wheel | 18° |
| Max. swing angle of front axle | 16° |
| Max. steering angle of front wheel | 50° |
| Steering angle of articulated frame | 25° |
| Cutter diameter | 1375mm |
| Cutter size | 3048*580*16mm |
| Swing angle of blade | 360° |
| Lift height of blade | 380mm |
| Cutting depth of blade | 575mm |
| Blade cutting angle | Front 47/rear 5° |
| Blade lateral distance | 500/500mm |
| Max. tractive force | 75.4kN |
|
Engine |
|
| Model | BF4M1013-15T3R/2 |
| Type | Four-stroke, Inline, water-cooled, direc injection |
| Rated Power@Revolution Speed | 2100r/min |
| Displacement | 4764mL |
| Cylinder bore × stroke | 108*130mm |
| Emission standard | Tier3 |
| Max. torque | 680 |
|
Transmission system |
|
| Transmission type | Fixed shaft power shift |
| Torque converter | Single-stage single-phase three-element, integrated with gearbox |
| Gears | Forward 6 reverse 3 |
|
Hydraulic system |
|
| Type | Open-type system |
| System pressure | 18MPa |
|
Fill capacity |
|
| Fuel | 210L |
| Hydraulic oil | 80L |
